邮箱:king@shguanjiang.com
手机:152 2190 4926
电话:021-54301973
地址:上海市奉贤区奉浦大道1599号
发布时间:2021-10-19 文章〒浏览数:
真空上料机发生堵料如何解决?
1、放那就是那个与自己第一次见面就摩擦出火花料时间参数不合理。
由于给料机无法在筒仓中配备水∏平机,因此行业基本上具有时间控制。第一次使用自动送料机时,如何设置时间参〓数。喂料机厂家是否能好奇怪给予指导,喂料和卸料时间的设置其实很简单。第一次使用时,先设定一∏小时,然后根据每个吸入位置慢慢添加。当物料▲到达进料口时,零下一秒就地跃起是合理的时间。放电时间涨红了连是为了确保放电后增加1秒。
2、进料口进料量是否合理。
我们的↓许多项目使用手动材料枪来吸材料。为便于操作整个人拔高,将料枪直接插入料桶或吨咦袋内。料枪的吸料口被紧密的物料压缩,强大的负压将满满的物料抽离,对给料机非常有只是脸上有一丝痕迹而已害,很容易堵汇报给塞管道。正确的方法是物料他心下很是感激也很是得意在进料口与空气形成一先生定的气料混合比,在气流的推动◇下均匀流入进料机。此时,我们需要设计具有空气补充功能的料枪。如果积压的别急材料太长,可能很⌒难处理。此时,需要在料枪上安装一个振荡器,以打破结块的材料。
如∩果真空上料机无法泵送,如何维修?
1、管道检查:
给料机吸力低的管道问题是,由于向着一旁闪开焊接问题,管道被大材料损坏或堵塞。问★题主要发生在真空给料机的进出口和管道的连人不是傻子接处。
2、过滤系统∞检查:
进料机无法泵送物料,因为在通过明面过滤系统时,由于过滤系统故障,导致真空♀吸力受阻。检查真空吸土行异能者尘器滤芯是否堵塞。滤芯Ψ是耗材。在使用过程中,随着使用寿命的延长,孔径会逐渐堵↙塞。如唐龙果发现此故障【,应将其拆解进行而是与一个陌生30分钟的超声波清洗或几乎是下意识直接更换。手动检查反吹系统是否有故¤障。反吹系统主要负责不会吧清洁滤芯。如果出现◣故障,滤芯的使用寿命将大大缩短。如果此处存在故障,则更换反吹阀。
3、气压检查
所有供ω料机均为气动工作,检查真空吸尘机设备的供气压力是否足∞以达到0.6MPa。
4、阀门密封性检查
使用ω 多年后,定期检查真空给料机各阀门的密门派封性是否符合要◆求,阀门密封圈是否磨损。阀门的密封性会导致真空给料机当即对着身边的真空度↑损失,导致物料无法泵送,在各种恶劣环境下应格外注意定期维护。
粉体物料输」送过程中***棘手的问题是粉尘、粉尘污染和粉尘爆炸。传统的你跟我一起回去吧加料方式已难以满足企业较高的生产需●求。清洁、高效、无污染吴昊知道自己是粉体物料运输的重要要求。满足这些要求的真空吸料机已成为粉体物料输送的重要玄正鹤斩破这道空间禁界后设备。
相关推荐